The PowerBridge M5 is a cost-effective networking solution designed and offered by Ubiquiti Network, one of the leading network systems companies in the world. It’s a compact but comprehensive unit that allows you to connect networks seamlessly.
The PowerBridge M5 is a bridging client that lets you handle two or more networks located at various places more quickly and efficiently. With the other features that you will get to read below, there’s no doubt that the PowerBridge M5 is set or ready to impress anyone, even the most hard-core wireless network critics.
Powerful Advanced Antenna
A huge part of its excellent performance is its integrated advanced antenna array, which has an amazing gain at 25dBi with dual-polarity capabilities. This means that the signal can travel very long distances at an orientation that is considered the more effective, either vertical or horizontal. It also features a MIMO technology that offers the reliability and efficiency as far as wireless connectivity is concerned.
The antenna works alongside the attached chipset, Atheros 24KC MIPS with a clock speed of 400MHz. It also has an 8MB NAND Flash well as a 64MB SDRAM.
If you’re having problems with latency and bandwidth, the PowerBridge M5 solves the issues by adopting the TDMA protocol from AirMax technology. This gives you more control over bandwidth and latency by allowing you to set the most ideal transmission times. The technology has also been designed to be scalable so it easily copes with the changes of your needs.
The device measures 445mm by 416mm by 34mm. It has a total weight of 3.82 kg. As a robust unit, it is equipped with a UV-stabilized plastic so it can last for a long time in the outdoors. It operates at a temperature between -30 degrees and 80 degrees Celsius.
Processor Specs: Atheros MIPS 24KC, 400MHz
Memory: 64MB SDRAM, 8MB Flash
Networking Interface: 1x 10/100 Ethernet Port
Operating Frequency: 5470-5825 MHz
Operation mode: AP, Client, WDS
Encryption: WEP, WPA, WPA2
Wireless transmission speed: up to 300 Mbps
Gain: 24.8-26.5 dBi
Polarization: Dual Linear
Max. Power Consumption: 8 Watts
Max.output power: 27 dBm
Sensitivity: -96 dBm
Dimensions: 445 x 416 x 34mm
Weight: 3.82 kg
Power Supply (PoE): 24V, 1A
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Operating Temperature: -30 ‒ 80° C
Operating Humidity: 5 - 95%
Supported OS: AirOS
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt
|The main frequency range (GHz)||5|
|Data transfer rate (Mbit/s)||150|
|Transmit Power (dBm)||27|
|Ports 10/100 Ethernet||1|
|Connectors for antennas||No|
|Operation mode||AP Mode|AP Repeater|Station|Station WDS|WDS AP|