AirGrid M2 20 dBi
The AirGrid M20 dBi is a flexible, robust technology from Ubiquiti Network that offers users more than just an antenna. It’s a complete system that works in various topologies and advanced technologies—all for a reasonable price.
Various Networking Roles
The unit can be in client mode or as a CPE, but it may also be designed to be an access point, providing sufficient Internet connectivity to several users and devices all at one time. It also helps LANs and WANs to communicate more effectively without any significant drops in the transmission signals. This is a great show of flexibility that says the device is ready for deployment to existing networks.
Easy Configuration and Monitoring
The AirGrid M2 20dBi comes with its own pole mounting kit and brackets to provide good-enough support and to ease the installation; the device can already be up and running in a matter of minutes. To properly monitor its status in real time, it is also equipped with LED indicators. The antenna is already integrated into the system. It has a gain of 20dBi and a polarization that can go vertical or horizontal. The PoE injector allows you to transmit the needed power to run it over the same cable. Accessories such as ToughCables or surge protectors may be added to prevent unit damage due to ESD.
The unit operates using the Atheros chipset at MIPS 4KC with a speed of 400MHz. It is then complemented by 8MB NAND Flash we well as 32MB RAM. It has a maximum transmission speed of 150 mbps with DHCP protocol support. It broadcasts at a frequency of 2.4GHz. The antenna uses the InnerFeed technology with TDMA protocol through AirMax. The QoS gives you free rein on bandwidth allocation and prioritization. The AirControl V lets you manage hundreds of connected devices simultaneously.
|The main frequency range (GHz)||2.4|
|Data transfer rate (Mbit/s)||100|
|Transmit Power (dBm)||28|
|Ports 10/100 Ethernet||1|
|Connectors for antennas||No|
|Operation mode||AP Mode|AP Repeater|Station|Station WDS|WDS AP|