Access point, solutions AirMax , Access Point Ubiquiti PowerBeam M5-400-ISO, Ports 10/100/1000 Ethernet 1, Data transfer rate (Mbit/s) 150+, The main frequency range (GHz) 5, Gain (dBi) 25, Polarization dual linear, Memory (MB) 64, VAT Incl. (0%) VAT Incl. (20%) Access Point Ubiquiti PowerBeam M5-400-ISO, buy, compare prices , reviews and delivery . Best Online Shop networking for all

Access Point Ubiquiti PowerBeam M5-400-ISO

Code: 1371
available
Quick buy
NETSODISWIRELESSAccess pointsolutions AirMax → Access Point Ubiquiti PowerBeam M5-400-ISO
without VAT
101.950
without VAT
93.794
without VAT
89.716
without VAT
88.900
without VAT
87.269
bidding price

UBNT PowerBeam M5 ISO 400mm, outdor, 5GHz MIMO, 2x 25dBi, Gigabit LAN, AirMAX ISO

Description

Install  the PBE-M5-400-ISO PowerBeam M5 ISO 5 GHz airMAX Bridges with RF Isolated Reflector from Ubiquiti Networks into a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. Ubiquiti Networks combines beamwidth technology with RF isolation to filter out noise, creating a cleaner and more reliable connection. Built-in airMAX technology utilizes the Time Division Multiple Access (TDMA) signal which breaks down the signal into specified time slots to reduce collisions. As a result, you receive reduced latency, noise immunity, and improved throughput.
Noise Immunity
The PowerBeam directs RF energy in a tight beamwidth. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, to improve noise immunity. This feature works in areas crowded with other RF signals of the same or similar frequency.
Integrated Design
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam is versatile and cost-effective to deploy. The antenna feed has a thin gray ring around the center of the cap.
airMAX Technology Included
Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class. With intelligent QoS, priority is given to voice/video for seamless streaming and is capable of high-speed, carrier-class links.
airOS
airOS is a highly developed, user-friendly Ubiquiti firmware technology. The firmware architecture enables high-performance and outdoor multi-point networking. It features protocol support, Ubiquiti channelization, spectral width adjustment, ACK auto-timing, AAP technology, and multi-language support.
airView
Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality. Waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. With Waterfall you can aggregate energy over time for each frequency, Waveform aggregate energy collected, with real-time energy shown as a function of frequency, and you can also automate airView to record and report results with recording.
airControl
airControl is a powerful and intuitive, Web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices. It features network map, monitor device status, mass firmware upgrade, Web UI access, manage groups of devices, and task scheduling.
Innovative Mechanical Design
With built-in mechanical tilt, the mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. The number of fasteners is reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. The antenna feed can be detached with the push of a button.
Corrosion Resistance
Fasteners are GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners. Dish and brackets made of galvanized steel that is powder-coated for corrosion resistance. The redesigned pole bracket resists paint loss for improved corrosion resistance.
 
SPECIFICATIONS
Processor Specs
Atheros MIPS 74Kc, 560 MHz
Memory
64 MB DDR2, 8 MB Flash
Networking Interface
(1) 10/100/1000 Ethernet Port
Wireless Approvals
FCC, IC, CE
RoHS Compliance
Yes
Dimensions
459 x 459 x 261 mm (18.07 x 18.07 x 10.28")
Weight
3.22 kg (7.10 lb)
Power Supply
24V, 0.5A Gigabit PoE
Power Method
Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range
18-26VDC
Max. Power Consumption
8W
Gain
25 dBi
Operating Frequency
5170 - 5875 MHz
Wind Loading
390 N @ 200 km/h (88 lbf @ 125 mph)
Wind Survivability
200 km/h (125 mph)
LEDs
(1) Power, (1) LAN, (4) WLAN
Signal Strength LEDs
Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes
5/8/10/20/30/40 MHz
Polarization
Dual Linear
Enclosure
Outdoor UV Stabilized Plastic
Mounting
Pole-Mount Kit Included
ESD/EMP Protection
Air: ± 24 kV, Contact: ± 24 kV
Operating Temperature
-40 to 70° C (-40 to 158° F)
Operating Humidity
5 to 95% Non-Condensing
Salt Fog Test
IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test
IEC 68-2-6
Temperature Shock Test
IEC 68-2-14
UV Test
IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test
ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
 
 

 


Features

Properties Features
Ports 10/100/1000 Ethernet 1
Data transfer rate (Mbit/s) 150+
The main frequency range (GHz) 5
Gain (dBi) 25
Polarization dual linear
Memory (MB) 64

Product specifications and equipment are subject to change without notice.

Feedback

Unfortunately, reviews yet, you could be the first!

To leave a comment, you need to register or login.

Recommended

shopping bag