Access point, solutions AirMax , Access Point Ubiquiti PowerBeam M5-300-ISO, Ports 10/100 Ethernet 1, Data transfer rate (Mbit/s) 150+, The main frequency range (GHz) 5, Gain (dBi) 22, Polarization dual linear, Memory (MB) 64, VAT Incl. (0%) VAT Incl. (20%) Access Point Ubiquiti PowerBeam M5-300-ISO, buy, compare prices , reviews and delivery . Best Online Shop networking for all

Access Point Ubiquiti PowerBeam M5-300-ISO

Code: 1374
available
Quick buy
NETSODISWIRELESSAccess pointsolutions AirMax → Access Point Ubiquiti PowerBeam M5-300-ISO
without VAT
87.625
without VAT
80.615
without VAT
77.110
without VAT
76.409
without VAT
75.007
bidding price

UBNT PowerBeam M5 ISO 300mm, outdoor, 5GHz MIMO, 2x 22dBi, AirMAX ISO

Description

 PBE-M5-300-ISO
 PowerBeam M5 ISO 5 GHz airMAX Bridges with RF Isolated Reflector from Ubiquiti Networks into a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. Ubiquiti Networks combines beamwidth technology with RF isolation to filter out noise, creating a cleaner and more reliable connection. Built-in airMAX technology utilizes the Time Division Multiple Access (TDMA) signal which breaks down the signal into specified time slots to reduce collisions. As a result, you receive reduced latency, noise immunity, and improved throughput.
Improved Noise Immunity
The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity, RF isolation, and QoS,the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Radio Design
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is versatile and cost-effective to deploy even at long distances.
airMAX Technology Included
Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class
airOS
airOS is a versatile, highly developed Ubiquiti firmware technology. It is intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high performance, outdoor multi-point networking. 
• Protocol Support
• Ubiquiti Channelization
• Spectral Width Adjustment
• ACK Auto-Timing
• AAP Technology
• Multi-Language Support
airView
Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
• Waterfall Aggregate energy over time for each frequency.
• Waveform Aggregate energy collected.
• Real-time Energy is shown in real time as a function of frequency.

• Recording Automate airView to record and report results.
airControl
airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling
Hardware Overview
Innovative Mechanical Design
• Metal-plated interior of rear housing enhances RF shielding.
• Built-in mechanical tilt mounting bracket offers ±20° of tilt.
• Convenient pole mounting with a single wrench to mount the PowerBeam ISO on a pole.
Industrial-Strength Construction
• GEOMET-coated fasteners for improved corrosion resistance when compared with zinc-plated fasteners.
• Dish and brackets made of galvanized steel that are powder‑coated for enhanced corrosion resistance.
• Protective radome shields protect the radio from nature's harsh elements.
RF Isolation
The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.
SPECIFICATIONS
Processor
Atheros MIPS 74Kc, 560 MHz
Memory
64 MB DDR2, 8 MB flash
Networking Interface
1 x 10/100 Ethernet port
Wireless Approvals
FCC, IC, CE
RoHS Compliance
Yes
Power Supply
24 V, 0.5 A PoE
Power Method
Passive PoE (Pairs 4, 5+; 7, 8 Return)
Voltage Range
20-26 VDC
Power Consumption
6 W (max.)
Gain
22 dBi
Operating Frequency
Worldwide: 5170 - 5875 MHz
USA: 5725 - 5850 MHz
Wind Loading
47 lbf @ 125 mph (210 N @ 200 km/h)
Wind Survivability
125 mph (200 km/h)
LEDs
1 x Power
1 x LAN
4 x WLAN
Signal Strength LEDs
Software-adjustable to correspond to custom RSSI levels
Channel Sizes
5/8/10/20/30/40 MHz
Polarization
Dual Linear
Enclosure
Outdoor UV stabilized plastic
Mounting
Pole-mounted kit included
ESD/EMP Protection
Air: ± 24 kV
Contact: ± 24 kV
Temperature & Humidity
Operating Temperature: -40 to 158°F / -40 to 70°C
Operating Humidity: 5 to 95% non-condensing
Salt Fog Test
IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test
IEC 68-2-6
Temperature Shock Test
IEC 68-2-14
UV Test
IEC 68-2-5 at 104° F (40° C), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test
ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Output Power
Output Power
24 dBm
TX Power Specifications
802.11a
Data Rate Avg. TX Tolerance
6 - 24 Mbps 24 dBm ± 2 dB
36 Mbps 24 dBm ± 2 dB
48 Mbps 23 dBm ± 2 dB
54 Mbps 22 dBm ± 2 dB
802.11n/airMAX
Data Rate Avg. TX Tolerance
MCS0 24 dBm ± 2 dB
MCS1 24 dBm ± 2 dB
MCS2 23 dBm ± 2 dB
MCS3 23 dBm ± 2 dB
MCS4 22 dBm ± 2 dB
MCS5 21 dBm ± 2 dB
MCS6 20 dBm ± 2 dB
MCS7 20 dBm ± 2 dB
MCS8 24 dBm ± 2 dB
MCS9 24 dBm ± 2 dB
MCS10 23 dBm ± 2 dB
MCS11 23 dBm ± 2 dB
MCS12 22 dBm ± 2 dB
MCS13 21 dBm ± 2 dB
MCS14 20 dBm ± 2 dB
MCS15 20 dBm ± 2 dB

RX Power Specifications
802.11a
Data Rate Sensitivity Tolerance
6 - 24 Mbps -94 dBm Min. ± 2 dB
36 Mbps -80 dBm ± 2 dB
48 Mbps -77 dBm ± 2 dB
54 Mbps -75 dBm ± 2 dB
802.11n/airMAX
Data Rate Sensitivity Tolerance
MCS0 -96 dBm ± 2 dB
MCS1 -95 dBm ± 2 dB
MCS2 -92 dBm ± 2 dB
MCS3 -90 dBm ± 2 dB
MCS4 -86 dBm ± 2 dB
MCS5 -83 dBm ± 2 dB
MCS6 -77 dBm ± 2 dB
MCS7 -74 dBm ± 2 dB
MCS8 -96 dBm ± 2 dB
MCS9 -95 dBm ± 2 dB
MCS10 -92 dBm ± 2 dB
MCS11 -90 dBm ± 2 dB
MCS12 -86 dBm ± 2 dB
MCS13 -83 dBm ± 2 dB
MCS14 -77 dBm ± 2 dB
MCS15 -74 dBm ± 2 dB
Max VSWR
1.5:1
Built-In Mechanical Downtilt
±20°
Dimensions
14.33 x 14.33 x 10.87" / 364 x 364 x 276 mm
Weight
5.62 lb / 2.55 kg
 
 

Features

Properties Features
Ports 10/100 Ethernet 1
Data transfer rate (Mbit/s) 150+
The main frequency range (GHz) 5
Gain (dBi) 22
Polarization dual linear
Memory (MB) 64

Product specifications and equipment are subject to change without notice.

Feedback

Unfortunately, reviews yet, you could be the first!

To leave a comment, you need to register or login.

Recommended

shopping bag