Access point, solutions AirMax , Access Point Ubiquiti PowerBeam M5-300, Ports 10/100 Ethernet 1, Data transfer rate (Mbit/s) 150+, The main frequency range (GHz) 5, Gain (dBi) 22, Polarization dual linear, Memory (MB) 64, VAT Incl. (0%) VAT Incl. (20%) Access Point Ubiquiti PowerBeam M5-300, buy, compare prices , reviews and delivery . Best Online Shop networking for all
Access Point Ubiquiti PowerBeam M5-300
UBNT PowerBeam M5 300mm, outdoor, 5GHz MIMO, 2x 22dBi, AirMAX
Description
The PBE-M5-300 PowerBeam airMAX Bridge from Ubiquiti Networks has an innovative mechanical design. This PowerBeam supports up to 150+ Mb/s real TCP/IP throughput. It directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is important in an area which is crowded with other RF signals of the same or similar frequency.
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing increased performance from its fast processor the PowerBeam is versatile and cost effective to deploy.
Technology
airMAX Technology
Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots, scheduled by an intelligent AP controller. Slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.
Intelligent QoS: Priority is given to voice/video for seamless streaming.
Scalability: High capacity and scalability.
Long Distance: Capable of high-speed, carrier-class links.
Intelligent QoS: Priority is given to voice/video for seamless streaming.
Scalability: High capacity and scalability.
Long Distance: Capable of high-speed, carrier-class links.
Software
airOS
airOS is a versatile Ubiquiti firmware technology. It is an intuitive technology, and requires no training to operate. Behind the user interface is a powerful firmware architecture, which enables high-performance, outdoor multi-point networking. PowerBeam uses airOS 5, which provides additional advantages, including airMAX protocol support, automatic channel selection, dynamic configuration changes, instant input validation, use of HTML5 technology, and optimization for mobile devices.
airView
Integrated airView provides advanced spectrum analyzer functionality such as waterfall, waveform. Real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. Waterfall aggregates energy over time for each frequency. Waveform aggregates energy collected. Real-time feature shows energy in real time as a function of frequency. Recording automates airView to record and report results.
airControl
airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices. It features network map, monitor device status, mass firmware upgrade, Web UI access, manage groups of devices, and task scheduling.
Hardware
Built-In Mechanical Tilt
The mounting bracket conveniently offers 20° of up-tilt and up to 20° of down-tilt.
Quick Assembly
The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole.
Easy Removal
The antenna feed can be detached with the push of a button.
Fasteners
GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
Dish and Brackets
Made of galvanized steel, powder-coated for superior corrosion resistance. Redesigned pole bracket for the 19.7" and 15.7" dish and fender washers for the 11.8" dish prevent paint from being removed from the metal brackets, for improved corrosion resistance.
SPECIFICATIONS
|
General Specifications
|
|
|
Processor
|
Atheros MIPS 74Kc, 560 MHz
|
|
Memory
|
64 MB DDR2, 8 MB flash
|
|
Networking Interface
|
1 x 10/100 Ethernet port
|
|
Power
|
|
|
Power Supply
|
24 V, 0.5 A PoE adapter
|
|
Power Method
|
Passive PoE (pairs 4, 5+, 7, 8 return)
|
|
Maximum Power Consumption
|
6 W
|
|
TX Power Specifications
|
Output Power: 26 dBm
Modulation: 802.11a Data Rate: Average TX: Tolerance 6 to 24 Mb/s: 26 dBm: ± 2 dB 36 Mb/s: 25 dBm: ± 2 dB 48 Mb/s 24: dBm: ± 2 dB 54 Mb/s 23: dBm: ± 2 dB Modulation: 802.11n/airMAX Data Rate: Average: TX Tolerance MCS0: 26 dBm: ± 2 dB MCS1: 25 dBm: ± 2 dB MCS2: 25 dBm: ± 2 dB MCS3: 25 dBm: ± 2 dB MCS4: 24 dBm: ± 2 dB MCS5: 23 dBm: ± 2 dB MCS6: 23 dBm: ± 2 dB MCS7: 23 dBm: ± 2 dB MCS8: 26 dBm: ± 2 dB MCS9: 25 dBm: ± 2 dB MCS10: 25 dBm: ± 2 dB MCS11: 25 dBm: ± 2 dB MCS12: 24 dBm: ± 2 dB MCS13: 23 dBm: ± 2 dB MCS14: 23 dBm: ± 2 dB MCS15: 23 dBm: ± 2 dB |
|
RX Power Specifications
|
Output Power: 26 dBm
Modulation: 802.11a Data Rate: Sensitivity: Tolerance 6 to 24 Mb/s: -94 dBm minimum: ±2 dB 36 Mb/s: -80 dBm: ± 2 dB 48 Mb/s: -77 dBm: ± 2 dB 54 Mb/s: -75 dBm: ± 2 dB Modulation: 802.11n/airMAX Data Rate: Sensitivity: Tolerance MCS0: -96 dBm: ± 2 dB MCS1: -95 dBm: ± 2 dB MCS2: -92 dBm: ± 2 dB MCS3: -90 dBm: ± 2 dB MCS4: -86 dBm: ± 2 dB MCS5: -83 dBm: ± 2 dB MCS6: -77 dBm: ± 2 dB MCS7: -74 dBm: ± 2 dB MCS8: -95 dBm: ± 2 dB MCS9: -93 dBm: ± 2 dB MCS10: -90 dBm: ± 2 dB MCS11: -87 dBm: ± 2 dB MCS12: -84 dBm: ± 2 dB MCS13: -79 dBm: ± 2 dB MCS14: -78 dBm: ± 2 dB MCS15: -75 dBm: ± 2 dB |
|
Antenna
|
|
|
Gain
|
22 dBi
|
|
VSWR
|
1.5:1.0 (maximum)
|
|
Built-In Mechanical Downtilt
|
20°
|
|
Polarization
|
Dual linear
|
|
Operating Frequency
|
Worldwide: 5170 - 5875 MHz
USA: 5725 - 5850 MHz |
|
Wind Loading
|
200.2 N at 200 km/hour (45 lbf at 125 mph)
|
|
Wind Survivability
|
200 km/hour (125 mph)
|
|
LED Indicator Specifications
|
|
|
LEDs
|
1 x Power
1 x LAN 4 x WLAN |
|
Signal Strength LEDs
|
Software-adjustable to correspond to custom RSSI levels
|
|
Channel Size Support
|
|
|
Channel Sizes
|
5/8/10/20/30/40 MHz
|
|
Tests
|
|
|
Salt Fog Test
|
IEC 68-2-11 (ASTM B117)
Equivalent: MIL-STD-810 G method 509.5 |
|
Vibration Test
|
IEC 68-2-6
|
|
Temperature Shock Test
|
IEC 68-2-14
|
|
UV Test
|
IEC 68-2-5 at 104°F (40°C)
Equivalent: ETS 300 019-1-4 |
|
Wind-Driven Rain Test
|
ETS 300 019-1-4
Equivalent: MIL-STD-810 G method 506.5 |
|
Environmental
|
|
|
Operating Temperature
|
-40 to +158°F (-40 to +70°C)
|
|
Operating Humidity
|
5 to 95% (non-condensing)
|
|
Compliance and Approvals
|
|
|
Compliance
|
RoHS
|
|
Wireless Approvals
|
FCC, IC, CE
|
|
Other
|
|
|
Mounting
|
Pole-mount kit
|
|
ESD/EMP Protection
|
Air: ± 24 kV
Contact: ± 24 kV |
|
Physical Characteristics
|
|
|
Enclosure
|
Outdoor UV stabilized plastic
|
|
Dimensions
|
12.8 x 12.8 x 10.0" (32.5 x 32.5 x 25.6 cm)
|
|
Weight
|
2.65 lb (1.20 kg)
|
Features
| Properties | Features |
| Ports 10/100 Ethernet | 1 |
| Data transfer rate (Mbit/s) | 150+ |
| The main frequency range (GHz) | 5 |
| Gain (dBi) | 22 |
| Polarization | dual linear |
| Memory (MB) | 64 |
Product specifications and equipment are subject to change without notice.
Feedback
Unfortunately, reviews yet, you could be the first!To leave a comment, you need to register or login.
