The PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge from Ubiquiti Networks is suitable for CPE deployments requiring maximum performance. A dish reflector design with proprietary airMAX ac technology, offers improved latency, noise immunity, scalability, and significantly increased throughput performance of up to 450+ Mb/s and also offers wide range of 19+ mi (30+ km). The InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance while eliminating cable losses. Ubiquiti's airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Performance |
|
Processor |
Atheros MIPS 74 Kc, 720 MHz |
Memory |
128 MB DDR2, 8 MB flash |
Networking Interface |
1 x 10/100/1000 Ethernet port |
Wireless Approvals |
FCC, IC, CE |
RoHS Compliance |
Yes |
Power Supply |
24 V, 0.5 A Gigabit PoE |
Power Method |
Passive PoE (Pairs 4, 5+, 7, 8 Return) |
Voltage Range |
20 to 26 VDC |
Max Power Consumption |
8.5 W |
Gain |
29 dBi |
Operating Frequency |
5725 - 5850 MHz |
Wind Loading |
872 N at 200 km/h (196 lbf at 125 mph) |
Wind Survivability |
200 km/h (125 mph) |
LEDs |
1 x Power |
Signal Strength LEDs |
Software-adjustable to correspond to custom RSSI levels |
Channel Sizes |
PtP Mode: 10/20/30/40/50/60/80 MHz |
Polarization |
Dual linear |
Enclosure |
Outdoor UV stabilized plastic |
Mounting |
Pole-mount kit included |
ESD/EMP Protection |
Air: ± 24 kV |
Operating Temperature |
-40 to 158°F / -40 to 70°C |
Operating Humidity |
5 to 95% non-condensing |
Properties | Features |
Ports 10/100/1000 Ethernet | 1 |
Memory (MB) | 128 |
Gain (dBi) | 29 |
Polarization | dual linear |
The main frequency range (GHz) | 5 |
Data transfer rate (Mbit/s) | 450 |